AWS electrode codes carry useful clues about strength, coating, and where an electrode can be used. Learn how the position designation helps welders choose a suitable rod for flat, horizontal, vertical, or overhead work—and why that small number matters on structural steel jobs.

Multiple Choice

Which digit in the electrode identification number indicates the welding position?

The second digit in the electrode identification number is specifically designated to indicate the welding position for which the electrode is classified. In the context of the American Welding Society (AWS) classification system, the number provides essential information about how the electrode should be used based on the welding position. In this system, options such as flat position, horizontal position, vertical position, and overhead position are identified. This differentiation is crucial because various electrodes perform differently under these conditions due to factors such as heat input, penetration, and puddle control. Understanding this aspect allows welders to select the appropriate electrode that will yield the best results based on the specific requirements of the project and the positions involved. Therefore, knowing that the second digit reflects this important information aids in ensuring the correct application in welding practices.

Reading Welding Electrode Numbers: What They Tell You About Position

A welding electrode’s classification number is more than a label. It gives useful clues about the electrode’s strength, the positions it can be used in, and the type of coating or current it requires. For structural steel work, reading that code correctly helps welders, inspectors, and supervisors make sound decisions before an arc is struck.

One detail is easy to mix up: in common AWS classifications such as E7018, the third digit after the “E” indicates the welding position. The second digit is part of the tensile-strength designation. That distinction matters when selecting an electrode for a weld that must be made vertically or overhead.

Start with the “E”

In a designation such as E7018, the letter E means “electrode.” The numbers and final digit that follow identify properties set out in the American Welding Society’s classification system. AWS publishes standards for many welding consumables, including the widely used AWS A5.1 specification for carbon-steel covered electrodes.

The digits are meant to be read as a compact code, not as one long number. For a common four-digit classification, E7018, the first two digits after E—70—refer to the electrode’s minimum tensile strength, measured in thousands of pounds per square inch. In this case, the classification indicates 70 ksi.

The next digit, 1, identifies the electrode’s approved welding positions. The final digit, 8, gives information about the coating type and the compatible current and polarity. So, in E7018, the position information is carried by the third numeric digit, not the second.

Why position has its own place in the code

Welders don’t always work with a joint laid flat on a bench. Structural steel may need welding in the flat, horizontal, vertical, or overhead position, depending on the member, connection, and access available. Gravity changes how molten metal behaves: a puddle that sits neatly in a flat weld may sag or run when the joint is vertical or overhead.

Electrode design affects how well a welder can control that puddle. The coating, arc characteristics, and recommended operating range all play a part. An electrode classified for multiple positions is generally intended to work in more than one of them, though the technique and settings may need to change.

The position digit offers a quick starting point for selection. It doesn’t tell the whole story, and it doesn’t replace the project’s welding documents. But it helps crews avoid a basic mismatch between the electrode and the joint’s location.

A quick read of common designations

Consider E6010. The first two digits, 60, indicate a minimum tensile strength of 60 ksi. The third digit, 1, indicates that the electrode is classified for all welding positions. The final 0 identifies coating and current characteristics under the relevant AWS classification.

Now compare E7024. The first two digits, 70, indicate 70 ksi tensile strength. The third digit, 2, signals a classification for flat and horizontal fillet welds. The final digit, 4, describes the electrode’s coating and current requirements.

These examples show why counting matters. If someone treats the second digit as the position indicator, they may read E7024 as though “0” carries position information. It doesn’t. In this four-digit format, position comes from the third number after E.

There are also five-digit electrode designations, such as E11018. In these classifications, the first three digits indicate tensile strength: 110 means 110 ksi. The fourth digit identifies welding position, while the final two digits provide coating and current information. The format shifts slightly, so it’s wise to read the full classification rather than rely on a memorized shortcut.

Position classifications in plain language

For many carbon-steel electrodes, the position digit is commonly interpreted as follows:

  • 1: All positions

  • 2: Flat and horizontal fillet positions

  • 4: Flat, overhead, and certain vertical-down applications, depending on the classification

The exact meaning depends on the applicable AWS specification and the specific electrode. For instance, some classification details distinguish between types of welds or vertical progression. The number is useful, but the product data sheet and governing specification provide the full picture.

This is where field experience enters the conversation. A code can tell you what an electrode is classified to do; a qualified welding procedure and the manufacturer’s instructions explain how it is to be used for a particular job.

The connection to structural steel work in Los Angeles

For structural steel projects in Los Angeles, electrode selection sits within a broader system of requirements. The AWS D1.1 Structural Welding Code—Steel addresses welding of structural steel, including workmanship, qualification, inspection, and related requirements. The applicable edition, project specifications, contract documents, and local rules all matter.

A classification number by itself doesn’t establish that an electrode is acceptable for every structural application. The welding procedure specification (WPS) may call for a particular filler metal, process, position, preheat, or other control. A project may also set limits that are more specific than the basic classification. Welders and inspectors should follow the documents that govern the work, rather than selecting a consumable based only on a familiar label.

Local agency requirements can add another layer. Los Angeles projects may involve city rules, approved plans, special inspection requirements, or owner specifications. Those details can vary by project and by the edition of the code adopted. When requirements seem to conflict, the responsible engineer, welding coordinator, or authority having jurisdiction should clarify which provisions apply.

Strength isn’t the same as suitability

It’s tempting to focus on the tensile-strength digits because they look prominent. But a higher strength value doesn’t automatically make an electrode the better choice. The joint design, base metal, loading, service conditions, and approved welding procedure all shape the decision.

Position also can’t be considered in isolation. An electrode classified for all positions may still be unsuitable if its strength, toughness, hydrogen control, or other properties don’t meet the project requirements. Likewise, an electrode with the right strength may not suit the position or operating conditions.

Think of the classification as a short description on a tool case. It tells you what the tool is designed for, but you still need to match it to the job. A small error in reading the code can ripple into deposition, weld quality, and inspection outcomes—especially when work is performed out of position, where puddle control is already demanding.

A reliable way to read the code

When looking at an AWS electrode designation, first identify how many digits follow the E. For common four-digit classifications, read the first two as tensile strength, the third as position, and the final digit as coating and current information. For five-digit classifications, the first three digits indicate tensile strength, followed by the position digit and then the remaining classification details.

Then confirm the designation against the electrode’s packaging or manufacturer data sheet. Finally, check the WPS and project requirements. That extra moment is worthwhile: classifications provide a useful shorthand, while the governing documents connect that shorthand to the actual steel, joint, and job.

Knowing where the position indicator sits makes electrode codes easier to read—and helps prevent a small numbering mix-up from becoming a much larger field issue.